|
Look for links to printable pdf
literature in equipment specifications sections, above in this column, & on
site map.
| |
OutFlow W125 Accessory for IQAir Air
Purifiers
Technical Specs Sheet (pdf)
|
Printable
OutFlow W125 Product Brochure
Application
The OutFlow W125 kit allows filtered air from any IQAir®
filtration device to be directed through a wall or window vent. The OutFlow
W125 kit can be used to:
-
create clean areas
-
deliver filtered air into cleanrooms or
to the outside
-
create negative pressure areas
-
create positive pressure areas
Clean Area and Cleanroom Use
The supply of filtered air into an environment helps reduce
air pollution in that environment by dilution and the creation of positive
pressure, which reduces the infiltration of polluted air from outside the
environment. With the OutFlow W125 kit, the filtration device is positioned
outside the clean area or cleanroom, saving valuable space and reducing
noise exposure. It also eliminates the danger of housing leakage, making it
suitable even for certified cleanrooms. |
 |
Emission Control
Legislation limits the emission of polluted air to the outdoors.
The OutFlow W125 filters air before it is exhausted outdoors to help meet
environmental emission standards.
Isolation Areas
Infection control (e.g. tuberculosis) in hospitals and similar
facilities demands the creation of negative pressure environments to reduce the
spread of airborne microorganisms. The OutFlow W125 permits operation of the
filter unit from within the isolation area, eliminating the danger of housing
leakage into the surrounding area.
The OutFlow W125 kit easily modifies any IQAir filtration unit. Simply replace
the top module of any standard IQAir filtration unit with the TopFlow adapter.
All that is needed to install the ducting, wall tube and vent is a 5.2" opening
in a wall or window. The OutFlow W125 kit also includes a damper and a
protective mesh grille which prevents backdrafts and entry of coarse particles
when the system is not in use. The large 5" diameter of the ducting ensures low
air resistance.
The aluminum duct may be freely flexed to allow control over the desired vent
location. It is expandable in length from 10" in its original compressed state
to 39" when fully extended.
Creation of Pressure Differentials
The OutFlow W125 lets you create pressure differentials between
different indoor areas. Negative pressure serves to contain pollutants in an
isolation area. Positive pressure protects a clean environment from uncontrolled
infiltration of airborne contaminants from polluted areas.
Emission Control
With the OutFlow W125 your IQAir® filtration device can be used
for emission control. Air is filtered and expelled outdoors via a flexible
ducting system. The negative pressure area that is created prevents unfiltered
indoor air from leaking outdoors.
IQAir Compatibility
Compatible with all IQAir® filtration devices and
Click
Here for more information
|
